Freephone: 0800 422 692 Email firstname.lastname@example.org
Please enter a search term to begin your search.
The high durability plastic is placed, serrated side down, on the top edge of the supporting wall or concrete beam before the floor slabs are lowered into place. A contact type, construction adhesive or tape may be used to prevent the strip being displaced as the floor slabs are lowered into place.
Expansion Joint Foam
The strip is cut through about 90% of the thickness. When the concrete deck has cured the small strip can readily be torn off, leaving a gap to take the sealant.
Ground Crack Inducer
Designed for inducing cracks from the top and bottom of the slab. Very easy to install and ensures positive break through joint.
G - Seal
Designed to fit over a variety of expansion board materials, G-Seal provides a long lasting, maintenance free joint seal. With features similar to that of a waterstop, G-Seal will accommodate joint movement without failure. G-Seal is available in styles for both new construction and retrofit applications.