Home » Our Products » Concrete Fibers » Fibrecon macro Poly Fibres

sample shot of macro poly fibers in packaging

Fibrecon macro Poly Fibres

Structural synthetic fibre, such as Macro Poly Fibers are superior to more conventional reinforcement in shotcrete as it can outperform, give greater cost savings, is easier to use and safer to handle.

The new FIBERCON macro synthetic structural fibres have been embraced and readily accepted in the shotcrete and engineering industries, as the end users recognise the benefits of replacing reo-bar and mesh with synthetic fibre.

Product Description

Fibercon has uniquely packaged the SMP65 fibres in simple and easy to handle boxes of water-soluble pucks. The fibres are placed in the concrete mix. The pucks then dissolve within seconds, leaving the fibres to disperse evenly throughout the matrix.
Round determinate panel (RDP) tests, demonstrate that a dosage rate of only 2kg to 9kg of SMP65 synthetic fibres per cubic metre of concrete is required to obtain higher energy absorption (measured in Joules) than a steel fibre dose rate of 20kg to 50kg for the application of shotcrete.

graph showing the advantages of using macro fibres.

MPP Fibre Advantages

  • Faster, cheaper and safer than conventional mesh
  • Crack control in plastic and hardened states
  • High degree of post crack load capacity
  • Excellent dispersion and easy to pump
  • Ductile concrete• Quick, efficient and easy to use
  • Good finished surface results – Broom, float or steel trowel
  • No corrosion or durability issues

Shotcrete Macro Poly

  • Conform to ASTM C 1116 Type 3 Para. 4.1.3
  • Synthetic Fibres shall be Monofilament Polypropylene
  • Minimum 550Mpa Tensile strength
  • Minimum 65mm in length
  • Aspect ratio of over 80

Macro Poly

  • Conform to ASTM C 1116 Type 3 Para. 4.1.3
  • Synthetic Fibres shall be Monofilament Polypropylene
  • Minimum 550Mpa Tensile strength
  • Minimum 47mm in length
  • Aspect ratio of over 55

Macro Poly Plus

  • Conform to ASTM C 1116 Type 3 Para. 4.1.3
  • Synthetic Macro Fibres shall be Monofilament Polypropylene
  • Each package will contain 2kg of Macro Fibre and 300g of Micro Fibre
  • Minimum 550Mpa Tensile strength
  • Macro fibre will be minimum 47mm in length
  • Aspect ratio of Macro Fibre will be over 55

 

More Information about Fibrecon macro Poly Fibres

pdfProduct Brochure for Fibrecon macro Poly Fibres

Pdf all about Sinak S-102. 

 
concrete
concrete
concrete
concrete
concrete
concrete
sildenafil citrate 100mg wo kauft ihr viagra viagra generique france comprar tabaco turquia holland apotheke viagra cialis online holland cialis vs viagra can you get regular camel cigarettes in uk cialis c20 preise cialis schweiz