|
|
Product Description
Greenstreak Form Liners attach to most any forming system or casting bed prior to concrete placement.
Following normal placement practices and curing times, the forming system and liner are stripped leaving an architectural concrete finish.
Form Liners are available in a range of grades to economically cast an architectural finish in both large and small budget projects. In selecting a pattern and grade there are various things to remember.
View the Product Selection for patterns and textures available and for information about Greenstreak’s Form Release 7000.
For some projects, it may be more cost effective to use more
than one grade. When using multiple grades, it may be necessary to
shim the Form Liner to compensate for thickness variations
from grade to grade.
| GRADE | MATERIAL TYPE | DESCRIPTION |
|---|---|---|
| UNI-CAST® | Rigid Polymer (HIPS) | A single use Form Liner ideal for tilt-up panels and cast-in-place construction requiring cut-outs for doors, windows, utilities, etc. |
| MULTI-CAST® | Rigid Polymer (ABS) | Intermediate use Form Liner, designed for 2-10 uses under normal job site conditions. Primarily used for cast-in-place applications. |
| DURA-CAST® | Rigid Polymer (ABS) | Intermediate use Form Liner, designed for 10-25 uses under normal job site conditions. Used for cast-in-place and gang forming applications. |
| ULTRA-CAST™ | Elastomeric (Urethane) | High use Form Liner, designed for 100+ uses under normal job site conditions. Used for very large gang forming, cast-in-place and precast applications. Custom sizes are available. This grade typically includes 3/4" factory-bonded plywood backing. |
More Information about Formliners
|
|
