|
What we do: concrete accessories
Joint & Crack Fillers:
Door joint protection cast-in steel edging for floor joints in doorways.
Protect joint edges and prevent joint damage with Protect-A-Joint.
T-Strip to protect saw cut joints from spalling
SCS Strip - a pvc insert for potecting joints in concrete
Concrete mender a tough instant polymer concete &
Flexibile cement for repairing cracks and joints.
10 Minute concrete mender:
"It's thin, it gets in and it won't pop out." Roadware 10 minute Concrete Mender uses Microdowling™ action to repair concrete permanently.
Description
 Roadware 10 Minute Concrete Mender is a high-penetration two-part hybrid urethane that combines with sand to form a tough instant polymer concrete.
Features
- Extremely low viscosity allows deep penetration into concrete
- All material is self-mixed and delivered at the point of application. No messy pot-mixing or wasted product
 Completely cures in 10 minutes after application at 70° F. Will also cure rapidly in subzero environments- Excellent resistance to chemical attack
- When combined with manufactured sand, Concrete Mender will form a tough 4500 psi polymer concrete with similar properties to existing concrete that will stay pliable over time
- Safe to use. Materials react quickly with very low odor
- Self-leveling or may be combined with sand and worked with a trowel
Benefits
- Long lasting repairs that accommodate harsh physical environments
- Easy preparation, a wire brush is all that is needed in most cases
- No downtime, repairs are fully ready for traffic in approximately 10 minutes from application
- Very low odor, can be used in a wide range of indoor areas
Uses
- Repairing hairline cracks or larger, where future movement is not anticipated
- Repairing spalled concrete control joints
- Restoring integrity to distressed concrete
- Connecting broken slabs
- Repairing moving slabs
- Repairing spalls and pop-outs in concrete
- Securing bolts, equipment, or railings into concrete
- Vertical repairs when combined with specified sand
- Repairing concrete surface imperfections prior to coating
Technical Data:
Typical Properties: Value (average)
Hardness @ 72° F. (22° C) - 72D
Compressive Strength (with sand) - 4500 psi
Elongation: - 6%
Tensile Strength: - 4475 psi
Bond Strength, ASTM 882-99 - 1984 psi
Viscosity (at application) - < 9 cps
V.O.C.(mixed): - 5.5 g/l
Solids :- 98%
Cured Color - Gray
|
