Civil & Precast

AN ECONOMIC SOLUTION FOR MAINTAINING PRECAST PANEL ALIGNMENT   Fingerplates give an economic solution for maintaining precast panel alignment, whilst allowing in-plane movement to limit cracking at restraints which can occur with traditional connections. This allows movement in the connections to prevent damage from the likes of earthquakes. The...

AVAILABLE NOW   Introducing the perfect synergy between strength, safety, and performance. PSA LiftMX is an innovative edge and face lifting system able to lift concrete elements upwards of 125mm thick. With a revolutionary patent-pending design, PSA LiftMX is proven through vigorous testing to meet numerous configurations. Suitable for commerci...

  At only 6.8kgs, BackSaver is light enough to carry from one side of the job site to the other. It helps increase dowel drilling productivity by 50% on average due to quicker transitions between holes. Reduce lost time due to injuries from backstrains, vibrations, and other repercussions of dowel drilling with a rotary hammer. Drill repeatable,...

PRODUCT DESCRIPTION Hydrotite is a state-of-the-art hydrophilic waterstop with unmatched durability and water-sealing capacity. Comprised of Non-Bentonite, modified chloroprene rubber, Hydrotite expands up to eight times its original volume when exposed to water. This expansion creates an effective compression seal within joints of limited movem...

The ThermoPin® securing anchor system is used to connect facing and load-bearing layers for core-insulated concrete parts. The GFRP material is suitable for use in narrow structural elements. Thanks to the attached cap, the bar slides smoothly into the fresh concrete, enabling particularly fast assembly. The fixed plastic ring guarantees correct...

PRODUCT ADVANTAGES Monkey Fist is a new patented device, designed and engineered for quickly removing pre-sawn concrete and for slabs on grade. Ideal for removing sections of concrete without spalling or chipping the edges of the remaining adjacent concrete slab. Monkey Fist has many other applications, and it is reusable as well! Simply core dr...

The X-Plug is a “patent pending” mechanical plug specifically designed and engineered to seal all types of formtie holes/voids. Thanks to the X-Plugs mechanical design tightening of the stainless steel nut causes an expansion of the EPDM rubber plug, increasing its diameter inside the formtie hole. This action simultaneously compresses the main ...

The versatility of PVC has made these waterstops popular with specifiers and engineers. Outstanding physical properties, excellent inherent elasticity and resistance to many waterborne chemicals has made it the most widely specified waterstop material. PVC waterstops are available in several styles and sizes. Choosing the correct waterstop begin...

Specially engineered for bonding with the Tilt Bracket System for detail/reveal strips, chamfer and blackouts. MULTI-PURPOSE BONDING TO: Concrete MDF High Density Foam Metal Plastic Wood INSTALLATION INSTRUCTIONS Surface preparation - Make sure contact surfaces are clean and free of oil, dust, dirt etc. Clean surface thoroughly. Apply to both su...

Swellstop is a highly versatile, strip-applied waterstop for non-moving concrete joints. Formulated to encapsulate hydrophilic materials into a rubber base, Swellstop creates a controlled, moisture-activated, compression seal. Swellstop's structural integrity conforms well to the underlying substrate and exhibits self-healing properties when nee...

There is also no scabbling required in order to provide aggregate interlock, in preparation and provides better shear bond strength, for the next pour that is required on most sites. The V can be cut, allowing you to build and shape structure. No Strip Stop End Formwork can be backfilled prior to pour to reduce the amount of bracing required. FE...

This system consists of lightweight re-usable plastic brackets and an adhesive backed shoe. The bracket snaps into the shoe plate that is held firmly to the casting slab by the adhesive base.  No patching required Re-usable brackets Recycled composite plastic Reduces installation time up to 60% No drill bits Super quick Lightweight SLAB SAVER I...

Designed with sets of vertical legs at approximately 75mm centres and another central leg in between the sets; the continuous deck rail is strong and stable, yet provides minimum exposure. Another feature is the male and female connection at either end to join rail on rail to any given length. Once connected the clip will not separate; a must f...

Cast-in Plate chairs will produce a level uniform height, whilst allowing for finish or rebates.    

The convenient, economical range is designed for minimal exposure and coloured grey to match the concrete. Greater stability and less exposure can be achieved where necessary with the use of clip-in bases. PANEL BAR CHAIR INFORMATION AND CODES CODE DESCRIPTION BAG QTY PALLET QTY 94 009 20mm Bar Chair 100 5000 94 010 25mm Bar Chair 100 5000 94 01...

The chairs provide covers ranging from 30mm to 100mm to suit popular panel thicknesses, with four strong stable legs. The chair can support the mesh whilst walking over it without collapsing or tipping. Dimples located at the base of the legs ensure minimum exposure, and the chair is coloured a consistent grey to match the concrete. The easy pus...

Ideal for use in pipes, tanks and a variety of concrete products. The rocket chairs narrow base reduces exposure and can accommodate light mesh up to 5mm. Colour coded in a range of sizes 15, 20, 25, 30 & 35mm cover. ROCKET CHAIRS INFORMATION AND CODES CODE DESCRIPTION BAG QTY 94 200 15mm Rocket Chair 1000 94 205 20mm Rocket Chair 1000 94 210 25...

The extensive range or Circular spacers are designed and manufactured from quality plastics, for strength and stability. The unique design offers accurate cover for 360 degrees. It will not twist when in position due to the in-built sleeves which adjust to hold the bar firmly. As the size of the bar increases, the cover remains the same. The Cir...

Colour coded by thickness for ease of selection. Packing shims are manufactured from quality, plastic and tested with compressive loads up to 20 tonnes. IDEAL FOR Commercial and civil applications such as packing under panels, machines, doors and window frames. SHIM PRODUCT INFORMATION AND CODES CODE DESCRIPTION BAG QTY PALLET QTY 94 405 1mm Shi...

PANEL ID PLATES AND INFORMATION PRODUCT BLUE BROWN GREEN ORANGE RED WHITE YELLOW CANZAC CODE 96 305 96 310 96 315 96 320 96 325 96 330 96 335 FOR MORE INFORMATION, PLEASE FEEL FREE TO CONTACT US

Excellent adhesion to mortar, stone, ceramics, grout and metal fast curing for a high-quality, rain-ready weatherproof seal. Natural cure silicon Quick setting time Easy to remove for forms Clear colour FOR MORE INFORMATION, CONTACT US

Where coil or tie bar threaded ferrules are used a special nailing plate is available. NAIL ON PLATES INFORMATION AND PRODUCT CODES PRODUCT 12MM (58MM DIA.) 16mm (58 DIA.) 20mm (58mm DIA.) 24mm (58mm DIA.) CANZAC CODE 92 905 92 910 92 915 92 920 Double-sided foam discs are die-cut to suit 58mm push-on ferrule locating plates. The main advantage ...

Commonly used for sticking polystyrene, dummy joint and fillet on precast beds and formwork.  DOUBLE SIDED FABRIC TAPE INFORMATION AND CODES PRODUCT 12mm 16mm 20mm CANZAC CODE 96 345 96 350 96 355 UNIT 50m Coil 50m Coil 50m Coil FOR MORE INFORMATION, PLEASE FEEL FREE TO CONTACT US

Ideal for formwork tie bars (suits 16 and 20mm tie bars). CONDUIT AND CONES INFORMATION AND CODES PRODUCT 20mm CONDUIT 20mm CONDUIT CONES CANZAC CODE 97 500 97 505 FOR MORE INFORMATION, PLEASE DOWNLOAD OUR BROCHURE OR CONTACT US

KEY FEATURES Design allows precast floor slabs to slide on the top surface of the strip, while the underside firmly grips the wall or beam. Ribbed underside ensures that the Low Friction Bearing Strip does not work out as the supporting floor goes through daily temperature cycles. Made in 2.4m lengths of 100% recyclable impact resistant plasti...

The Lesa Reo Cap Safety System has been designed to be economical to use, no matter how large or small the job is. The Lesa Reo Caps and bars are removable, and can be used over and over again. They are easily transported from one construction site to another, and require very little storage space when the job is complete. Safety in the workplac...

No form release needed Reusable Available in various shapes and sizes RUSTICATION STRIP INFORMATION AND CODES PRODUCT 32(b)x20(s)x20(t) 35(b)x20(s)x25(t) 55(b)x20(s)x40(t) CANZAC CODE 95 105 95 110 95 115 UNIT 3m Length 3m Length 3m Length  (b) = bottom (s) = side (t) = top FOR MORE INFORMATION, PLEASE DOWNLOAD OUR BROCHURE OR CONTACT US

They can be used in precast concrete connections and as a duct former for post-tensioned tendons and a variety of precast and cast-insitu concrete work including: Precast connections Service penetrations Formers for starter bars Post-tensioning ducts The semi-rigid metal duct is strong and durable for casting into concrete and is easily tied int...

Grout Tubes are made of 100% recycled plastic and are available in 50mm and 70mm diameter and available in lengths of 100mm to 700mm that interconnect. Plastic Grout Tubes are used in both precast and tilt-up applications for grouting starter bars or dowels that connect concrete elements together. 90 degree angles are also available and magnetic...

The aluminium handle extends from 27 inches to 43 inches to offer great user reach. ABS soft grip Adjustable by hand to four positions TELESCOPIC MAGNET TOOL INFORMATION AND CODES PRODUCT PICKUP TOOL LARGE CANZAC CODE 38 000 FOR MORE INFORMATION, PLEASE DOWNLOAD OUR BROCHURE OR CONTACT US

FOOT ANCHORS All foot anchors are produced from carbon steel and supplied in a galvanized finish. EYE ANCHORS The spherical head lifting eye anchor has the same shaft diameters and design capacities as the foot anchors. FORMERS Can be used numerous times, not like the plastic versions. The rubber recess formers are used to position the spherical...

Cost-effective Accurate, perfectly formed clean corners Easy to use Big labour saver Re-usable Flexi-Fillet's unique design and quality PVC construction make this a product that can be used in many areas. It can be curved and/or bent for use in a variety of form applications, providing an accurate profile. It is a hard wearing and long lasting p...

HEAVY DUTY PILE CAGE WHEEL OPTIONS  CODE DESCRIPTION BAG QTY PALLET QTY 94 357 HD 40/20 100 3600 94 362 HD 50/20 60 2912 94 368 HD 75/20 30 1440 94 372 HD 100/20 30   864   PUSH FIT MECHANISM Co-Packers developed this unique push-fit design to provide a simple and effective mechanism to ensure correct fitting of the Pile Cage Spacer Whee...

STANDARD CAGE WHEEL SIZE OPTIONS NAME CONCRETECOVER SUIT BARSIZE (MM) WIDTH (MM) QUANTITY PER BAG QUANTITY PER PALLET WEIGHT PER BAG WEIGHTPER PALLET 25 Light Weight Wheel 25 <13 14 500 3000 4 50 50 Standard Wheel 50 <13 26 100 3000 5 200 75/30 Webbed Wheel 75 30 15 70 2940 9 145 75/39 Webbed Wheel 75 39 15 70 2940 9 270   FOR MORE...

The Pile Cage Foot is used for providing concrete cover at the base of a Pile Cage. The 3 sizes provide 85mm, 100mm or 150mm of cover and are designed to support up to 500kg of dead weight per foot. PILE CAGE FOOT SIZE OPTIONS CODE DESCRIPTION BAG QTY PALLET QTY 94 375 85mm Pile Cage Foot 60 2160 94 380 100mm Pile Cage Foot 60 2160   FOR MORE IN...

CLOSE-HELIX CAGE WHEEL SPACER SIZE OPTIONS NAME CONCRETECOVER SUIT BARSIZE (MM) WIDTH(MM) QUANTITYPER BAG QUANTITY PER PALLET WEIGHT PER BAG WEIGHT PER PALLET 65 Close Helix 65 10-19 40 40 2400 7 390 75 Close Helix 75 10-19 39 30 1440 6 300 80 Close Helix 80 10-19 45 25 900 6 235 85 Close Helix 85 10-19 44 25 1050 6 295 100 Close H...

100% Waterproofing AND Timing Saving System Rivestop is a patented elastic rivet with an internal mechanical waterproofing system specifically designed to SEAL hermetically the formwork holes formed by the removal of a taper tie rod or pass through tie sleeve or tube bushing on concrete walls. HOW DOES IT WORK Rivestop expands inside any formwor...

EXTRACTABLE CONETUBE BUSHING FOR CONCRETE FORMWORK. IT ADAPTS TO THE THICKNESS OF THE WALL An extractable, reusable rigid plastic tube for concrete formwork bushings. It’s adaptable to the thickness of the wall. Initially it can be installed during the construction of formwork for concrete walls, where the taper tie will go through to secure bot...

FEATURES AND BENEFITS SUPERIOR FINISHES: Improved architectural finishes, without patches or rust.  NO CORROSION: The fibreglass form tie material cannot rust, eliminating the need to have a break-back and the need for subsequent plugging and patching to forestall rust.  SAVES MONEY: Saves dramatically on labour costs. Reduces form-tie related c...

SuperTie™ patented fiberglass form tie-systems are used to secure concrete formwork during concrete placement and initial hydration, without the inherent limitations and rusting of previously popular steel form-tie systems. RJD SuperTie™ can be manufactured in a broad array of colors. The RJD fiberglass tie will never rust therefore no breakback...

BOND BREAKER SURE LIFT with Dye J6D Solvent-based Sure LIft Is a reactive and membrane forming bond breaker, for use in tilt-up wall construction. Sure LIft is a special formulation of polymers and ingredients designed to provide clean, easy lifting of tilt-up panels. Sure LIft with Dye J6D has a non-permanent dye for ease of visual inspection d...

Organic Release Agent For Wood and Steel Formwork Systems A release agent manufactured in the USA that is formulated to meet the requirements for concrete precasting and in situ forming. Enforce E46 works in all weather conditions and complies with all local, state and Federal VOC and air quality control regulations. This environmentally friendl...

A versatile range of fast clip-on chairs for mesh support A versatile range of fast clip-on chairs for mesh support. FCMs are available in a wide range of cover sizes from 20mm to 75mm. The chair is designed to clip easily to the intersection of the mesh, providing greater strength and stability. Coloured grey, the chair bases have minimal expos...

Sika® formliners provide an economical means for adding interest and visual appeal to almost any concrete structure. The desire for architectural concrete continues to grow in both the public and private sectors and the applications for Sika® formliners are limitless. Sika® formliners attach to almost any forming system or casting bed prior to c...