- Cost-effective
- Accurate, perfectly formed clean corners
- Easy to use
- Big labour saver
- Re-usable
Flexi-Fillet's unique design and quality PVC construction make this a product that can be used in many areas. It can be curved and/or bent for use in a variety of form applications, providing an accurate profile. It is a hard wearing and long lasting product that, with normal care, can be reused.
Flexi-Fillet can be glued, when nailing connot be used. When stripped with normal care, it will not break.
Step 1 - Fasten Fillet in place using fastener tape or adhesive.
Step 2 - Check to insure Fillet Flex-edge seal is pressed firmly against casting surface.
Step 3 - Insert lumber along length. For wood which is swollen beyond standard dimension, insert one side first against the flex edge then roll the other side into the channel.
Materials should be stored out of direct sunlight to prevent long-term deterioration or colour fading. Pieces can be stacked, but should be stored fully supported to keep from warping.
FLEXI-FILLET INFORMATION AND CODES
PRODUCT |
16mm |
23mm |
40mm |
23mm with LEG |
CANZAC CODE | 95 010 | 95 015 | 95 017 | 95 005 |
UNIT | 3 Metre Length/25 Per Bundle | 3 Metre Length/25 Per Bundle | 4 Metre Length | 3 Metre Length |