The Foam Expansion Joint is made from closed cell foam, with superior, mechanical, thermal and chemical resistance. It is supplied in strip sections and is available in a range of thicknesses and depths.
KEY FEATURES
- Readily compressible
- Low load transfer
- Available in a range of thicknesses and depths
PHYSICAL PROPERTIES
| UNITS | VALUE | |
| DENSITY | kg/m3 | 30 |
| TENSILE STRENGTH | Kpa | 270 |
| ELONGATION | % | 125 |
| COMPRESSION HARDNESS | KPa (25%) | 30 |
| TEAR STRENGTH | N / cm | 16 |
| CHEMICAL RESISTANCE | Acetone, Ethyl Acetate, 30% H2SO4 | 0.1% |
| ALL NO CHANGE AT STP | Heptane, Toluene, CCl4 | +7.5% |
| 10% Liquid Ammonia | +0.2% | |
| 10% Nitric Acid | 0.1% | |
| WATER ABSORPTION | gm/cc | .002 |
The expansion filler is commonly used in buildings where movement is accommodated by expansion joint (in vertical and horizontal joints between units of precast concrete curtain walling, and in construction where it is used as a resilient backfill). It is also used as an anti-vibration pad or non-load transfer filler in both precast and in-situ concrete structures.
FOAM EXPANSION JOINT INFORMATION AND CODES
| SIZE | 10x50mm | 10x100mm | 10x150mm | 10x200mm | 10x300mm |
| UNIT | 25m/coil | 25m/coil | 25m/coil | 25m/coil | 25m/coil |
| CANZAC CODE | 18 205 | 18 215 | 18 225 | 18 230 | 18 240 |
| SIZE | 20x50mm | 20x100mm | 20x150mm | 20x200mm | 20x300mm |
| UNIT | 15m/coil | 15m/coil | 15m/coil | 15m/coil | 15m/coil |
| CANZAC CODE | 18 205.20 | 18 215.20 | 18 225.20 | 18 230.20 | 18 240.20 |
