On Slab

Sinak Polish

SINAK Polish (or HS30 Sealer) Is a high solids, single component acrylic urethane blend designed to seal and protect concrete substrates while providing a gloss appearance. Its unique formulation will impart a durable highly stain resistance film on virtually all substrates. It is for use over all concrete both sealing and polishing; and masonry substrates both interior and exterior.

testing

Stain testing was performed on treated samples to determine the effectiveness of SINAK Polish. Instead of the 15  minute interval testing that is reported by other products, SINAK Polish stain testing was conducted over 4 hours. The results rated 1 - 5. One indicated heavy staining, 5 indicates no staining.

Here are the results

Hot Coffee          5          
Transmission Fluid 5
Motor Oil 5
Catsup 5
Mayonnaise 5
Mustard 4
Tabasco* 3
Grape Juice 5
Lemon Juice 4
Orange Juice 5
Cola 5
Vanilla Ice Cream 5

* Significant surface etching noted.

Coefficient of Friction (Bott Method)

.67 dry, .59 wet

Gloss Meter

64 - 72 (80 is a mirror finish)

 

Key Features

  • Highly stain resistant
  • Protects concrete substrates

 

TECHNICAL DATA
VOC Less than 30
Volume Solids 30%
Dry Time @ 21 degrees C/50% Humidity 20 Minutes
Recoat Time 30 Minutes after 1st Coat
Foot Traffic 4 Hours upon completion of 2nd coat
Automobile Traffic 8 Hours upon completion of 2nd coat
Film Thickness 3 - 4 mils wet to achieve 1.0 - 1.5 dry
Estimated Coverage 7 - 9 square meters per litre. Test to determine rate

 

 

SINAK POLISH INFORMATION AND CODES
PRODUCT Polish 
CANZAC CODE 21 150
UNIT 19L Pail

 

 

Pic 2 Polish2


 

Gallery

Pic 1 Polish