0800 422 692

Civil and Precast Products

Access the latest technology and innovation for your next project with the right solutions to meet your needs.

We engineer and supply edge and facelift assemblies for both precast and tilt-up projects, and sign-off on all compliance. Dross bach ducting, threaded inserts, bond breakers, release agents, bar chairs, edge formwork, snake spacers, deck rail, temperature and maturity sensors, fillets and rustication strips, slab savers and curing systems are also available.

If you can't find what you are looking for or need some advice contact us here.

DROSSBACH DUCTING

DROSSBACH DUCTING

Drossbach Ducting is manufactured from galvanised steel to create a spiral wound former. They can be used in precast concrete connections, duct formers for post-tensioned tendons and a variety of precast and cast-in-situ concrete work including service penetrations and formers for starter bars.

PLASTIFORM

PLASTIFORM

Plastiform super flexible plastic boxing is ideal for tight radius’ to create amazing formwork designs for concrete.

FINGERPLATE JOINTS AND SEISMIC SAFETY STRAP

FINGERPLATE JOINTS AND SEISMIC SAFETY STRAP

Allows movement in the connections with plenty of tolerance for quick and easy installation.

CANZAC EDGEFORM

CANZAC EDGEFORM

Made from LVL (laminated veneer lumber) giving extra strength and stability to make boxing for formwork, precasting, tilt-up and everyday concrete projects easier, quicker and more economical.

BACKSAVER HAMMER DRILL

BACKSAVER HAMMER DRILL

The innovative and patented rotary hammer drill attachment makes drilling concrete slabs for dowels easier than ever, by allowing the user to drill standing up.

FAST-FORM FORMWORK SYSTEMS

FAST-FORM FORMWORK SYSTEMS

A unique system of components that bolt together and so can be fitted by hand or in the case of our wall systems lifted in large panels with a crane.

PANEL PRECAST COMBO CHAIRS

PANEL PRECAST COMBO CHAIRS

Panel Precast Combo Chairs support single layered mesh in tiltup, precast panels and some suspended deck applications.

TOP DECK CHAIRS

TOP DECK CHAIRS

Top Deck Chairs support both top mesh or reinforcing bars in suspended decks, thick precast and tilt-up panels, as well as most tall spacer applications where strength and stability are crucial.

CONTINUOUS DECK RAIL

CONTINUOUS DECK RAIL

The Continuous Deck Rail is an 1100mm long continuous spacer for formwork applications.

PLASTIC GROUT TUBE

PLASTIC GROUT TUBE

Grout Tubes are made of 100% recycled plastic and are available in 50mm and 70mm diameter and available in lengths of 100mm to 700mm that interconnect.

PANEL ID PLATES

PANEL ID PLATES

Permanent identification plates are cast into panels - mechanically fastened with a break off nib, or a raised face for double-sided tape.

CAST IN PLATE CHAIRS

CAST IN PLATE CHAIRS

Cost-effective and efficient Cast-In Plate Chair to simplify, and improve the installation process of Cast-In Plates.

ROCKET CHAIRS

ROCKET CHAIRS

The Rocket Chairs’ unique design clips firmly to the mesh in either horizontal or vertical applications, to provide accurate cover.

DOUBLE SIDED FABRIC TAPE

DOUBLE SIDED FABRIC TAPE

Adheres well and removes cleanly to use with sticking polystyrene, dummy joint and fillet on precast beds and formwork.

NAIL ON PLATES WITH DOUBLE SIDED TAPE

NAIL ON PLATES WITH DOUBLE SIDED TAPE

Screws into the ferrule and mechanically fastened to the formwork, leaving a 10mm recess in the panel. Where coil or tie bar threaded ferrules are used a special nailing plate is available.

RUSTICATION STRIPS

RUSTICATION STRIPS

The rustication strips create architectural revels. It can be used to eliminate seams on form liner applications, vertically and horizontally.

TELESCOPIC MAGNET TOOL

TELESCOPIC MAGNET TOOL

The aluminium handle extends from 27 inches to 43 inches to offer great user reach.

STEEL FORMING STAKES

STEEL FORMING STAKES

HOGAN stakes/form pins are High Tensile Strength premium steel and are the industry standard by which all others are measured.

SIGMA PIN

SIGMA PIN

Concrete sandwich panel connector for tilt up and precast construction.

CONCRETE SPACERS

CONCRETE SPACERS

Canzac Concrete Block and Bar Spacers are used to ensure that the specified cover to the reinforcement in concrete structures and structural elements is maintained both before and during concreting.

DENSO TAPE

DENSO TAPE

Denso Tape is composed of a non-woven synthetic fabric carrier, fully impregnated with a neutral compound based on saturated petrolatum and inert siliceous fillers.

TALL COMBO SLAB ON GROUND CHAIRS

TALL COMBO SLAB ON GROUND CHAIRS

Tall combination chairs are taller than standard combination chairs and are used to set reinforcing bar and mesh in heavy duty, slab on ground applications.

can't find what you're looking for?

Contact Us

We’ll have it.  Talk to one of our experts today and access the biggest range of concrete accessories under one roof in Australasia.

Contact us

you might also be interested in

Other product types

We have a wide range of product types to help solve problems, save time and add value to your project.

Under Slab Products

You only have one chance to make the right decision on your under slab moisture protection before the concrete is placed.

In Slab Products

With our Canzac range of innovative products and solutions you’ll never compromise the integrity of your slab.

On Slab Products

Mitigate against construction risks and the lifetime build of your project with our on slab systems, products and expertise.

Lifting Systems Products

The most innovative, high load concentration systems for compact design, smooth engagement and manoeuvring.

Products for Concrete Flatworkers

The Industry's best products for Concrete Flatworkers. Flatwork includes all concrete work located along a horizontal plane.

New Products

Check out the latest additions to our already massive range of concrete construction products and solutions.