In Slab Products

INNOVATIVE CONCRETE PAVEMENT TECHNOLOGY

Fibercon steel fibre reinforced concrete is to provide discrete, discontinuous reinforcement and effective crack control. Fibercon steel fibres are available in various shapes and sizes to suit different applications.

The CANZAC ZIG ZAG™ Cover Plate Plus Joint was developed to offer greater fatigue resistance than conventional straight joints.

Control shrinkage cracking in concrete with our revolutionary Re-Poly47 Fibre, specifically designed as concrete reinforcement for non structural applications

The Most Advanced Concrete Joint In The Industry

The CANZAC Cover Plate Joint System is designed to accommodate joint openings from 35mm up to 85mm.

Terajoint is the industry standard in the range of prefabricated heavy-duty movement Armour joint systems, suitable for all large-area construction methods for ground bearing and pile supported concrete floors.

A 75mm x 10mm flat is attached to the existing face of the slab with concrete anchors at 300mm o.c. The ragged 30x10mm flat is pre-attached with nylon nuts, which is cast into the new slab and will pull away from the 75mm x 10mm as shrinkage occurs.

Plate Dowel Sleeve and Plate Dowel provide instant load transfer across the joint while allowing lateral movement of the concrete sections.

NEW TO EXISTING SLIDING COVER PLATE JOINT

The Canzac No Strip Stop End Formwork saves contractors time and money. It is ideal for stop ends as it can stay in place - no stripping required.

The CANZAC Stop Pour/Nail On Armour Joint System is designed to be used with conventional timber form work.

The Cosinus Slide has the best edge protection in the market. A sinus wave shape on top of the floor removes vibrations and neutralizes wheel impact.

A robust galvanised steel leave-in-place profile manufactured to any shape including square, half-square, round and half-round.

The Canzac Light Weight Armoured Pedestrian Door Joint System incorporates a two-part system with a sliding top plate, commonly used in slab warehouse doorways allowing for door shrinkage control.

FinnJoint™ consists of anodised aluminium extrusion, a hydrophilic rubber gate seal, and nylon fixing tabs. It allows concrete slabs to shrink during curing without cracking, and services expansion and contraction due to temperature changes.

A Joint Free Slab floor does not have formed and sawn shrinkage control joints, which are essential for traditional slabs on grade.

Tec-Form is the most unique, versatile and advanced forming system available on the market today.

The Speed Dowel system provides a highly-effective method for constructing superior quality construction joints.

The Speed Plate system reduces the number of dowels required when compared with conventional doweling systems.

The Wide Move Dowel is designed for post-tensioned and shrinkage compensating concrete floor slabs.

Tapered dowel sleeve to allow increasing lateral movement as the joint width increases

The Hi-Move plate dowel system uses plate dowel technology to replace traditional dowels in shrinkage compensating concrete, stressed slabs and fibre slabs.

Durable , efficient load transfer across adjacent slabs

The Connolly Keyjoint is a galvanised steel tongue and groove formwork that becomes part of the slab, forming the control joint.

CANZAC Plastic Keyway provides an economical means for forming keyed joints quickly and easily.

The Fibre Dowel is the answer to corrosion! In addition, the material composition of the fibre dowel is non-conductive, which makes it an electrical and thermal insulator.

BlueRock is a wireless sensor for monitoring the temperature and relative humidity of in-place concrete from fresh to hardened stages.

Giatec SmartRock is a mobile-based wireless sensor for monitoring the temperature of concrete from fresh to hardened stage.

A high-penetration two-part hybrid urethane that combines with manufactured sand to form a tough instant polymer concrete.

A two-component hydrophobic hybrid polyurethane system for maintaining control joints, repairing cracks and filling spalls in Portlands concrete.

This material is clear in appearance when applied and cured. Coloured sand and pigments may be added to create colour stable repairs that match most decorative styles and shades of concrete surfaces.

Concrete Floor Joint Filler for High Traffic Areas Supports Traffic and Protects Joint Edges

Rapid Refloor was developed to repair random cracks and surface spalls/pop-outs and other surface defects in industrial concrete floors that are subject to wheeled traffic

Repair Concrete Joints and Cracks in Low Temperature Settings

Swellstop is a highly versatile, strip-applied waterstop for non-moving concrete joints.

Hydrotite is a state-of-the-art hydrophilic waterstop with unmatched durability and water-sealing capacity. Comprised of Non- Bentonite, modified chloroprene rubber, Hydrotite expands up to eight times its original volume when exposed to water.

Leakmaster is a one component polyurethane water-swelling sealant manufactured by C.I. Takiron Corp. with excellent and unique physical properties.

Ground Combo Chairs feature rod-securing clips that help prevent dislodgement during pouring.

Tall combination chairs are taller than standard combination chairs and are used to set reinforcing bar and mesh in heavy duty, slab on ground applications.

Tall Slab On Ground Chairs (TSOG) chairs are an economical, easy-to-use alternative to metal chairs with bases in deep slab situations.

Fully adjustable, multipurpose chair, for level decks and accurate depression form.

Designed to make steel fixing and traceability easier, with each chair identified by the cover.

The chairs are designed to clip easily to the intersection of the mesh, providing greater strength and stability.

The unique design offers accurate cover for 360 degrees. It will not twist when in position due to the in-built sleeves which adjust to hold the bar firmly.

Every Pile Cage Spacer Wheel is designed to allow easy installation even while the cage is being lowered into the ground. All sizes available.

Closed-cell industrial foam made from a blend of vinyl Nitrile & Neoprene with high-tack acrylic adhesive.

The Ground Crack Inducer is designed for inducing cracks from the bottom of the slab. It is very easy to install and will ensure a positive break through the joint.

A fast economical way to form a control joint. canzac control joint formers provide a simple method of creating a weakened plane in flat concrete surfaces

Crack Mate is inserted into wet concrete flush with surface-level after the screeding stage. No need to saw cut the concrete surface, saving time and additional expense.

PVC is the industry standard for flexible waterstops, which are typically embedded across and along the joint.

SuperTie™ Fibreglass Form Tie Systems are used to secure concrete formwork during concrete placement and initial hydration, without the inherent limitations of previously popular steel form tie systems.

Beast™ Screed is a fixed-elevation, point-to-point guide screed system that allows you to maintain floor levelness during the screeding operation.

Accurate clearance for formwork tie systems

A “Leave in place” range of screed rails suitable for screeds and concrete floors from 40mm deep. Easy to install and use, will enable surface flatness levels to be achieved up to and including Superflat category.

A lightweight and cost-effective fibre form designed to provide a fast, versatile method for pouring concrete columns and round voids.

Rivestop is a patented elastic rivet with an internal mechanical waterproofing system specifically designed to SEAL hermetically the formwork holes formed by the removal of a taper tie rod or pass through tie sleeve or tube bushing on concrete walls.

PVC tube with superior strength and waterproof capabilities. This ground-breaking product is extremely versatile, and is used throughout the formwork, civil, motorway, mining and foundation sectors.

Rivepipe is an innovative solution for formwork structures, specifically designed to protect tie bars.

Mechanical plug specifically designed and engineered to seal all types of formtie holes/voids.

Monkey Fist is a patented device, designed and engineered for quickly removing pre-sawn concrete and for slabs on grade, without using a Jack Hammer.

Synthetic fibres can be used in a wide range of applications from secondary shrinkage reinforcement to primary reinforcing in underground shotcrete.

Concrete screed support chairs for Accuracy & Speed

The Low Friction Bearing Strip is designed to allow movement between load-bearing elements and the support structure.

Shims are manufactured from quality plastic and tested with compressive loads up to 20 tonnes.

The Lesa Reo Cap Safety System has been designed to be economical to use, no matter how large or small the job is. The Lesa reo caps and bars are removable and can be used over and over again.